FILLS FOR ODOR CONTROL AND AMMONIA REDUCTION
EXHAUST AIR CLEANING IN STABLES
Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air cleaning systems. The filling materials we have developed comply with all the requirements and have proved their operating efficiency in hundreds of installations.
We supply the ideal packing material for different plant requirements. Whether chemical exhaust air cleaning in cross-flow systems or biological exhaust air cleaning in counter-flow system, by co-operating with our customers, we are able to offer the most suitable packing material for any system concept.
Ask us. Our experts are at your side for any advice.
Technical Data
KFP 158 | |
---|---|
Material | PP (Polypropylene) |
Specific surface (m²/m³) | ~ 320 |
Max. height (mm) | 2.700 |
Max. width (mm) | 600 |
Depth (mm) | 150 |
Channels | Cross-fluted |
HUMIPACKING is suited for cross-flow applications only. |
General features of 2H fill media
PP | PVC | |
---|---|---|
Void ratio (%) | < 97% | |
Length max (mm) | 2400 mm | |
Width max (mm) | 600 mm | |
Standard height (mm) | 300 or 600 mm | |
Continuous operation temperature (°C) | 70°C | 55°C |
Max. operation temperature (short term) (°C) | 80°C | 60°C |
Technical Data
KFP319 KFC319 |
KFP327 KFC327 |
KVP323 | |
---|---|---|---|
Specific surface [m2/m3] | 150 | 125 | 125 |
Void ratio (%) | > 97 | > 97 | > 97 |
Corrugation height (mm) | 19 | 27 | 45 |
Channels | Cross-fluted | Cross-fluted | Vertical flow |
Technical Data
KFC, KVC fills are made of PVC
KFP, KVP fills are made of PP (Polypropylene)
NET38 150 | |
---|---|
Material | PP (Polypropylene) |
Effective surface (m²/m³) | 150 |
Void ratio (%) | > 97 |
Corrugation height (mm) | 20 |
Length (mm) | 908 |
Width (mm) | 604 |
Height (mm) | 450 |
Technical Data
TEP 130 | TEC 130 | TAP 160 with Spacer TAS 033 | |
---|---|---|---|
Material | PP | PVC | PP |
Max. length / width (mm) | 2400 / 700 | 2400 / 800 | 6000 / 330 |
Height (mm) | 125 / 250 | 125 / 250 | 160 |
Drift loss* (%) | ≥ 0.0007 – 0.0005 | ≥ 0.0007 – 0.0005 | ≥ 0.0012 – 0.0006 |
Contin. operation temp. / Max. operation temp. (C°) | 70 / 80 (short time) | 55 / 60 (short time) | 70 / 80 (short time) |
Max. face velocity (m/s) | 4.5 | 4.5 | 4.0 |
Drag coefficient | 2.2 | 2.2 | 2.6 |
Pitch (mm) | 18 | 18 | 33 / 38 |
Max. distance between supports (mm) | 1000 | 1000 | 1200 |
Technical Data
* Based on the CTI ATC-140 test method (Drift Test Code) and EUROVENT standard OM-14-2009. These limits are guidelines only. They do not represent the values of the EUROVENT certification. The performance of the drift eliminators is indicated by the ratio drift loss/water flow rate. The efficiency of droplet separation depends on constant air velocity and an absolutely tight assembly of drift eliminator elements.
Downloads
- Components for Agricultural Engineering (914 KB)
- Product Profile PLASdek® Cross-fluted Fills (377 KB)
- Product Profile Splash/Trickle Fills (402 KB)
- Product Profile PLASdek® Vertical Flow Fills(485 KB)
- Product Profile PLASdek® Vertical Flow Fills (US)(487 KB)
- Product Profile PLASdek® Drift Eliminators(387 KB)
- Product Profile PLASdek® Drift Eliminators (US)(387 KB)
- Product Profile AGRIdek Dedust Packing(331 KB)
- Product Profile HUMIPACKING® (223 KB)
YOUR BENEFITS
- Effective and economical odor control and ammonia reduction
- Compliance with stringent environmental requirements
- Expert service
ADVANTAGES
- High stability
- Long service life
- Low pressure lossEasy to clean
- High clogging resistance
- Highly efficient in substance transition range