BIODEK® FILLS WITH TUBULAR DESIGN

BIOdek® Fills with tubular design are used for biological water treatment and nitrification by contact aeration and for the separation of oil, fat and hydrocarbons. The fill consists of uniform parallel pipes (Tubes) with hexagonal shape. This design makes the BIOdek® FAP specifically resistant to blockage and easy to clean.

BIOdek® FAP Fills – Tubular design – resitant to blockage and easy to clean

BIOdek FAP tubular design fills

Material PP
Void ratio (%) >97 %
Length max (mm) 2300
Width max (mm) 300
Standard height (mm) 305 or 610
Continuous operation temperature (°C) 70
Max. operation temperature (short term) (°C) -10 up to 80
Material Specific surface area Corrugation height Application
m2/m3 mm Submerged Fixed Bed Oil/Fat /Hydrocarbon Separator
FAP327/627 PP 105 54 For BOD- removal with higher load, unless
vertical flow fills are preferred
Oil with higher viscosity, fat
FAC327/627 PVC
FAP319/619 PP 140 38 For one- stage plants for all BOD effluent standards with or without nitrification Oil separator
FAC319/619 PVC
Material Specific surface area Corrugation height Application
m2/m3 mm Submerged Fixed Bed Oil/Fat/ Hydrocarbon Separator
FAP319/619 PP 140 38 For one-stage plants for all BOD effluent standards with or without nitrification Oil separator
FAC319/619 PVC
FAP312/612 PP 205 24 Downstream nitrification after complete BOD-removal Hydrocarbons
FAC312/612 PVC

We offer innovative components and solutions for sustainable processes in heat exchange, water and wastewater treatment and mass transfer applications with respect for the environment. Our professional team works to increase productivity and cost effectiveness in your unique application. If you need a tailor made solution ... We are available for you!