BIODEK® CROSS-FLUTED FILLS

HIGH EFFICIENCY – LOW EFFLUENT RATES

The structure and the high specific surfaces from 70 to 320 m2/m3 of BIOdek® cross-fluted fills are perfectly adjusted to all requirements in biological sewage treatment processes. Different shapes of the fills allow growing thin or thick biofilms depending on what the process requires.

BIODEK CROSS-FLUTED FILLS: TECHNICAL DATA

Material PP PVC
Void ratio (%) >97 %
Length max (mm) 2400
Width max (mm) 600
Standard height (mm) 305 or 610
Continuous operation temperature (°C) 70 55
Max. operation temperature (short term) (°C) 80 60
Material Specific surface Corrugation height Application
m2/m3 mm Trickling Filter Submerged Fixed Bed
KFP327/627 PP 125 27 For partly BOD-removal or if effluent load up to 50 mg/l is allowed Only as distribution layer above the support system
KFC327/627 PVC 125 27 Volume load can be up to 2,5 kg BOD/m3d
KFP319/619 PP 150 19 For all BOD effluent standards For BOD- removal by rotating biological contactor
KFC319/619 PVC 150 19 BOD- load < 1kg/m3d
Material Specific surface Corrugation height Application
m2/m3 mm Trickling Filter Submerged Fixed Bed
KFP319/619 PP 150 19 For all BOD effluent standards Downstream nitrification, without regular air flushing
For BOD-removal by rotating biological contactor
KFC319/619 PVC 150 19 BOD-load < 0.5kg/m3
KFP615 PP 190 15 Downstream nitrification after complete BOD-removal For special occasions only
KFP312/612 PP 240 12 Downstream nitrification after complete BOD-removal Downstream nitrification, suited as well for BOD- removal when regularly air flushing is made
KFC312/612 PVC 240 12
KZP312/612 PP 240 12 Downstream nitrification after complete BOD-removal
KZC312/612 PVC 240 12
KFP158 PP approx 320 For applications without BOD-Ioad For applications without BOD-Ioad

Nitrification

We offer innovative components and solutions for sustainable processes in heat exchange, water and wastewater treatment and mass transfer applications with respect for the environment. Our professional team works to increase productivity and cost effectiveness in your unique application. If you need a tailor made solution ... We are available for you!